Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Chimney Repair in Ashburn: What to Know First
Olympia Chimney chimney repair in Ashburn typically runs $275-$2,400, depending on whether we’re repointing mortar, replacing a crown, rebuilding a spalled section, or addressing a failed flashing. Most Olympia Chimney repairs are completed in one visit once parts are in hand, and we’ll tell you the written price before anything starts. If you own a home in Ashburn with an Olympia Chimney product and you’re seeing bricks flake, mortar missing, water in the firebox, or rust staining near the flue, this page covers what’s actually happening and what it costs to fix. Call (240) 220-9412 for a free estimate, and we’ll send a background-checked tech with a camera, not a clipboard.
How Olympia Chimney Products Fail - and How We Fix Them
Olympia Chimney makes solid stainless-steel and masonry chimney components, but Ashburn’s freeze-thaw cycles, summer humidity, and the clay-heavy soil that settles under foundations create specific failure patterns we see on repeat. Here are the five most common repair calls we get from Olympia Chimney owners in Ashburn:
- Spalling brick at the mortar line on Olympia masonry chimneys - We see this on homes in Ashburn Farm and Broadlands where the original crown was poured too thin. Water soaks the brick, freezes, and pops the face off. We remove the damaged brick, match the color and texture, and repoint with a mortar mix rated for freeze-thaw cycling. The fix holds because we grind out at least ¾ inch of old mortar before packing new.
- Flashing separation where the chimney meets the roof deck - Olympia Chimney’s factory flashing works, but it’s only as good as the roofer who installed it. In Ashburn, we regularly find the step flashing caulked over instead of interleaved, and the caulk fails within three seasons. We peel it, inspect the wood, install proper step flashing with counter-flashing, and re-seal with a polyurethane that handles a Northern Virginia summer.
- Crown cracking on concrete crowns poured over Olympia flue tiles - The crack usually starts at the flue tile and runs outward because the concrete was poured with no expansion joint. Water gets in, freezes, and widens the crack each winter. We grind the crown, install a flexible sealant around the flue tile, and re-pour with a proper overhang so water drips away instead of down the brick.
- Rust staining and corrosion at the Olympia stainless steel cap base - On Olympia Chimney’s stainless caps, we see rust at the attachment points when a different metal was used for the screws. Galvanic corrosion is the cause, and it’s surprisingly common in the One Loudoun corridor where construction moved fast. We swap in matching stainless hardware, clean the cap, and treat the surface. If the cap itself is compromised, we quote a like-for-like Olympia Chimney replacement or a quality aftermarket equivalent to save you money.
- Smoke chamber parging failure behind the damper throat - Olympia Chimney flue tiles and dampers are solid, but the smoke chamber above the damper is where shortcuts show up. The original parge coat crumbles over time, and smoke starts finding its way back into the room. We camera the chamber, hand-parge the surface in stages, and leave you with photo documentation of the finished surface.
Our Olympia Chimney Chimney Repair Process
- 1
You call (240) 220-9412. A live person answers, every time, and schedules a visit that works with your week. We text when the tech is on the way.
- 2
Camera inspection first. We run a Level 2 camera scan down the flue and across the exterior before touching a single brick. You see the footage. We don’t ask you to trust us.
- 3
Written price, written scope, written warranty. We tell you exactly what’s wrong, exactly what we’ll do, and exactly what it costs. Clause 1 of the Haven Standard: if it’s not in writing, it didn’t happen.
- 4
The repair. We use Olympia Chimney parts when the warranty or fit depends on it. Where an aftermarket alternative from our network performs the same or better for less, we quote both and let you choose. Every fix is built to last through Ashburn’s freeze-thaw cycles.
- 5
The test. We run a smoke test or a water test depending on the repair, then inspect our own work with the camera before we leave.
- 6
The record. You get a documented photo report of the work, before and after. Clause 4 of the Haven Standard: photo record on every job, every time, continuous since 2009.
BeforeAfterWhat Olympia Chimney Chimney Repair Costs in Ashburn
We quote in writing before work starts, and these are the ranges we’re quoting on Olympia Chimney work in Ashburn right now:
- Mortar repointing (small areas): $275-$650
- Full repointing of a standard masonry chimney: $900-$1,800
- Spalling brick replacement (per brick): $40-$90, depending on brick match
- Crown rebuild or repair: $450-$1,200
- Flashing repair or replacement: $500-$1,500, depending on roof pitch and deck condition
- Chimney waterproofing (entire exterior): $350-$800
- Partial chimney rebuild (top courses): $1,500-$2,600
What moves the price: scaffold access, roof pitch, how much brick needs to be sourced to match, and whether we uncover rot or framing damage once the flashing comes off. If you have a written quote from another company, bring it. We offer a free second opinion on any written estimate. If we can do the job for less without cutting corners, we’ll tell you. Call (240) 220-9412 and we’ll quote your specific chimney, not a brochure price.
Why Ashburn Homeowners Call Level Two Chimney Ashburn for Olympia Chimney Work
You’ll see a lot of companies in Ashburn saying they “do chimneys.” The difference with us is what you get before you pay a dollar and after the crew leaves. Every tech is background-checked and uniformed. Every job gets a camera inspection, not a visual glance and a shrug. Every repair carries the 365-Day Done Right Promise: if it’s not done right, we make it right. Corrine Halstead, our owner, sets the standard, and it’s the same one she built in Northern Virginia: show up with a camera, name what you found, quote it in writing, and then do the work like someone’s going to check. Since 2009, we’ve completed more than 38,000 inspections and cleanings under the Haven Standard, and every single job got a written price before work started. We service Olympia Chimney systems alongside components from DuraFlex, HeatShield, and Gelco, so if your repair needs a liner solution or a HeatShield resurfacing instead of a full rebuild, we can quote you whichever option actually fits, not just the one we sell. That’s the point.
FAQs
It depends on the specific Olympia Chimney warranty terms and what the repair involves. We use Olympia Chimney parts when the warranty or fit requires it, and we document everything so you have a record for a future claim if needed. Bring us your warranty paperwork and we’ll tell you what’s covered before we touch anything.
Most repointing, flashing, and crown repairs are finished the same day we start. Rebuilds and significant brick replacement typically run two to three days depending on weather. We tell you the schedule in the written scope, and we show up when we say we will.
If the damage is isolated to a few bricks, cracked mortar, flashing, or a failing crown, repair is usually the right call and costs a fraction of a rebuild. If the structure is leaning, the interior flue is compromised, or you’re seeing widespread spalling, a partial or full rebuild may be cheaper than five years of patchwork. We’ve told plenty of Ashburn homeowners their chimney can wait. We’ll tell you plainly either way, with camera evidence to show you why.
Yes, when it’s the better call for you. Some Olympia Chimney parts carry a brand premium without any performance difference for the repair you need. We quote both options with honest notes on longevity, fit, and warranty implications. You decide. We install what we’d put on our own chimney.
The camera doesn’t guess. Neither do we. Water intrusion never gets better on its own in this climate. The crack widens each freeze, the spalling spreads, and you go from a $400 repair to a $2,000 rebuild. Or you don’t. Some chimneys can coast a season or two. We’ll tell you which one you have and what the cost looks like now versus later. Call (240) 220-9412 and we’ll camera it and give you a written answer, no guessing required.
Call for a Free Estimate on Your Olympia Chimney Chimney Repair in Ashburn
If you’re seeing brick dust on the hearth, water in the firebox after rain, or mortar crumbling between bricks, let us camera the chimney and tell you exactly what’s going on with your Olympia Chimney system in Ashburn. The inspection is documented, the price is written, and the decision is yours. Call (240) 220-9412 and talk to a live person any hour of the day or night. We’ll schedule the visit, send a background-checked tech, and leave you with photos, findings, and a number. That’s how it works here.
Written by Corrine Halstead, Owner, Level Two Chimney Ashburn at Level Two Chimney Ashburn, serving Ashburn and nearby areas.