Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Cleaning in Bethesda, MD
Chimney cap and crown work in Bethesda runs $425-$1,800 depending on whether we’re repairing a cracked crown or replacing a multi-flue cap on a 1930s colonial. Most Bethesda homes were built before 1970, which means exposed masonry, freeze-thaw damage, and original clay liners that have been through three fuel conversions. Call (240) 220-9412 for a written price before any work starts.
Why Bethesda Homes Are Different
Bethesda’s signature housing stock is substantial colonial revival and Tudor-style homes built in the 1930s through 1960s across neighborhoods like Kenwood, Bradley Hills, and Burning Tree. These houses carry original multi-flue masonry chimneys that were successively retrofitted as heating systems converted from coal to oil to gas. Those conversions routinely left clay tile liners cracked, spalled, or oversized for today’s appliances. A chimney cleaning call in Bethesda almost always surfaces a liner evaluation or relining job that simply isn’t as common in newer suburbs like Germantown or Gaithersburg.
Freeze-thaw cycles through humid mid-Atlantic winters stress aging mortar joints, while summer humidity promotes moss and efflorescence on exterior brick. The teardown-and-rebuild cycle replacing older Bethesda homes with new construction also creates demand for final inspections and cap/crown work before demolition or sale. Montgomery County’s churning real estate market means a signed chimney inspection letter is routinely required before closing, making pre-listing sweeps a predictable necessity here.
Our Main Bethesda Services
These are the three services Bethesda homeowners call about most often, each with its own dedicated page.
Chimney Cleaning & Sweep in Bethesda
A standard sweep removes creosote and soot from the flue, smoke chamber, and firebox. In Bethesda’s older homes we often find glazed creosote from years of low-temperature wood fires in oversized fireplaces. Every cleaning includes a camera-scan inspection under NFPA 211 Level 2, with photo documentation you keep. Chimney Cleaning & Sweep in Bethesda

Chimney Repair in Bethesda
Freeze-thaw spalling in brick and mortar joints is the most common repair call we get in Bethesda. We address cracked crowns, deteriorated mortar, damaged flashing, and smoke chamber parging. Written scope and written warranty are delivered before work begins, per Haven Standard Clause 1. Chimney Repair in Bethesda

Fireplace Services in Bethesda
From gas log installs to damper repair and full fireplace rebuilding, Bethesda’s older fireplaces need evaluation before first use each season. We document everything with photos and give you a written condition report you can hand to a buyer’s agent if you’re selling. Fireplace Services in Bethesda

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterChimney Cap & Crown in Bethesda

Chimney caps and crowns take the brunt of Bethesda’s weather. A cracked crown lets water into the masonry, and after enough freeze-thaw cycles you get spalling brick and a chimney that leaks into the attic. The original crowns on 1930s-1960s Bethesda homes were poured thin and rarely maintained, which is exactly what we see when a camera comes back up. Chimney Cap & Crown work is the single most cost-effective way to prevent a five-figure rebuild.
Cap Installation
Signs you need it
Open flues let rain, leaves, and animals into the chimney, and you can hear wind or see debris in the firebox.
What it costs in Bethesda
Standard single-flue cap installation runs $425-$725, while multi-flue cap systems run $900-$1,800.
How we do it
We measure the flue, install a stainless or copper cap with the correct mesh size, and photograph the finished work.
Crown Repair
Signs you need it
Hairline cracks in the crown widen with freeze-thaw cycles, and water staining appears on the ceiling near the chimney.
What it costs in Bethesda
Crown repair is usually $600-$1,000 including a flexible sealant or float finish, depending on surface area.
How we do it
We grind away loose mortar, apply a bond coat, float a new crown with proper slope, and record it all with photos.
What Chimney Cap & Crown Costs in Bethesda
| Item | Typical range in Bethesda |
|---|---|
| Chimney cap installation | $425 - $725 |
| Multi-flue cap system | $900 - $1,800 |
| Crown repair | $600 - $1,000 |
Can you fix a chimney crown the same week I call?
Usually yes. We stock common cap sizes and crown materials locally, and Bethesda scheduling is typically within five business days. Call (240) 220-9412 for a written price and a specific service date.
What happens if I skip crown repair?
Water penetrates the masonry and freezes, which spalls the brick face and eventually requires a partial rebuild. Crown repair costs under $1,000; a rebuild starts around $4,000.
Chimney Liner & Rebuild in Bethesda

Homes in Kenwood, Bradley Hills, and Burning Tree went through coal-to-oil-to-gas conversions that left clay tile liners cracked or oversized for modern appliances. When we drop a camera down a Bethesda flue, we’re usually documenting liner damage that other sweeps never looked for. Chimney Liner & Rebuild is the service that follows naturally from a Level 2 inspection.
Liner Replacement
Signs you need it
Clay tile shards in the firebox, visible cracks from the top, or flue gases backing up into the living space.
What it costs in Bethesda
Stainless steel liner installation runs $2,800-$4,500, while a HeatShield resurfacing job typically runs $1,800-$2,500.
How we do it
We size the liner to the appliance, insulate where required, install a stainless system, and document the entire flue before and after.
Partial Rebuild
Signs you need it
Spalling brick above the roofline, a leaning stack, or mortar joints that have turned to sand after decades of Bethesda weather.
What it costs in Bethesda
Partial rebuilds from the roofline up typically run $3,000-$6,000 in Bethesda, depending on the height and brick match.
How we do it
We tear down to sound masonry, rebuild with matched brick or a code-compliant alternative, and pour a new crown in the same visit.
What Chimney Liner & Rebuild Costs in Bethesda
| Item | Typical range in Bethesda |
|---|---|
| Stainless steel liner | $2,800 - $4,500 |
| HeatShield resurfacing | $1,800 - $2,500 |
| Partial rebuild | $3,000 - $6,000 |
Do I really need a new liner, or just a sweep?
If the camera shows cracked tiles or a gap between flue sections, a sweep won’t fix it. We show you the footage before recommending anything, and you keep the photos.
How long does a liner replacement take in Bethesda?
Most single-flue stainless liner jobs are completed in one day. Partial rebuilds take two to three days. We schedule around Bethesda’s winter freeze cycles when possible.
Brands We Service in Bethesda
We stock ChimneySaver, Gelco, and Olympia Chimney products locally for Bethesda jobs, along with DuraFlex liner components. Most cap and crown work uses parts we carry on the truck, so there’s no week-long wait on a simple repair. See our brands for the full list.
Pricing for Chimney Cleaning in Bethesda, MD

| Service | Typical range in Bethesda |
|---|---|
| Chimney cleaning and sweep | $199 - $299 |
| Chimney cap installation | $425 - $725 |
| Multi-flue cap system | $900 - $1,800 |
| Crown repair | $600 - $1,000 |
| Stainless steel liner | $2,800 - $4,500 |
| HeatShield resurfacing | $1,800 - $2,500 |
| Partial rebuild | $3,000 - $6,000 |
| Full chimney rebuild | $8,000 - $15,000 |
Prices in Bethesda push higher when homes have steep roof pitches, multiple flues, or brick that needs custom color matching. Every job gets a written price, written scope, and written warranty before work starts, no exceptions.
Neighborhoods We Serve in Bethesda
We run chimney sweeps and inspections across Bethesda five days a week, with most appointments scheduled within the same week for standard cleanings.
- Kenwood
- Bradley Hills
- Burning Tree
- Edgemoor
- Wyngate
Service Area - Cities Near Bethesda

We also work in Rockville, MD, Gaithersburg, MD, and Germantown, MD. The homes in those cities are newer on average, which changes what we find on camera, but the written-price standard is identical.
Serving Bethesda, MD - Our Local Coverage Area
We’re based in the Bethesda area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Bethesda

Standard sweeps are typically scheduled within one business week. Cap and crown repairs often happen faster since we stock parts locally. Call (240) 220-9412 and a live person answers 24/7.
Most cleaning, cap, and crown work doesn’t require a Montgomery County permit. Rebuilds that alter the structure may, and we’ll tell you in the written scope if your job needs one before we start.
Yes. When a Bethesda home is being demolished or sold, we document the chimney condition with camera footage and photo records that satisfy local real estate brokerage requirements before closing.
Call (240) 220-9412 for a written estimate on any chimney service in Bethesda. Every job includes a camera-scan inspection, documented photo record, and the 365-Day Done Right Promise. Written price before work starts, every time.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Bethesda Customers Say
"They ran a camera down the flue and showed me the cracked tiles on a screen. The previous company had swept it twice and never mentioned it."
- Gregory F."We were buying the house and needed a real inspection. The report had photographs, the standard it was done to, and a clear repair figure. The seller paid for the repair."
- Lorna D."Found a bird nest and a blocked flue we had no idea about. Photographed everything, cleared it, and explained what the smell had been."
- Curtis V.





Before
After
Before
After