Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterDuraFlex Chimney Cleaning & Sweep in Ashburn: What to Know First
We’re an independent DuraFlex service provider in Ashburn, VA, not a DuraFlex dealer or authorized repair center. A standard DuraFlex chimney cleaning and sweep in Ashburn runs $189 to $329 depending on flue height and creosote condition, and most jobs are completed in 60 to 90 minutes. You’ll get a written price before we start, camera documentation of everything we find, and a written record when we’re done. If you own a home with a DuraFlex liner system and want an honest assessment of whether it needs sweeping, repair, or replacement, call (240) 220-9412.
How DuraFlex Products Fail - and How We Fix Them
- Smooth-wall liner buildup at the corrugation seams. DuraFlex’s 316L smooth-wall liners are good products, but in Ashburn’s humidity cycle, creosote adheres differently to the seam where smooth wall meets the corrugated collar. We see it on DuraFlex 316L and DuraFlex Pro installations. The fix is a targeted sweep with poly brushes sized to the liner diameter, followed by a camera pass to confirm the seam is clear.
- Glazed creosote on DuraFlex 304 liners from low-temperature burns. Homeowners who run gas inserts or burn unseasoned wood often develop Class II or Class III creosote faster than liner pitch would suggest. On DuraFlex 304 alloy liners, the surface polish is smoother, so when glaze forms, it adheres more aggressively. We remove it with a rotary chain whip rated for stainless, not the harsher steel whips some companies use.
- Tee-body clogs at the base of the liner. This is the most common DuraFlex failure we see in Ashburn. The tee body at the bottom of a DuraFlex liner collects soot and debris from every burn, and when it’s not accessed during a sweep, the blockage backs up into the appliance. We open the tee cleanout on every DuraFlex job and camera through it before and after.
- Improperly sized connectors at the appliance collar. DuraFlex connectors are specific. When a previous installer used a generic connector or an unlisted adapter, the gap collects creosote and can leak combustion gases. We check the connector joint on every cleaning and flag it if it’s wrong. The fix is usually a correct DuraFlex connector, which we source through our supply network.
- Pinhole corrosion at the flue-gas exit on older DuraFlex liners. On liners 10 years or older, especially in Ashburn homes with tall exterior chimneys and heavy rain exposure, we find pinholes near the top termination. A camera scan shows it clearly. If the liner’s otherwise sound, we recommend a HeatShield resurfacing application rather than a full liner replacement, and we’ll quote both options in writing.
Our DuraFlex Chimney Cleaning & Sweep Process
- 1
Call and talk to a person. You reach a live dispatcher 24/7. We schedule the visit and assign a named technician. You’ll get a text when we’re on the way.
- 2
On-site walkthrough and camera scan. The tech inspects the firebox, smoke chamber, and full flue length with a camera before anything is swept. You see what we see on the monitor.
- 3
Written price before any work. We hand you a written scope and price, covering the sweep, any parts, and any recommended repairs. You approve it before we touch the liner.
- 4
The sweep, sized to your DuraFlex liner. We use poly brushes or rotary nylon whips matched to the liner’s internal diameter. No steel-on-steel contact that could scratch the liner.
- 5
Post-sweep camera documentation. We re-run the camera so you can see the result. You get photos and a written report before we leave.
- 6
365-Day Done Right Promise. If anything about the sweep isn’t right, we come back and make it right. That’s our promise, not a fine-print clause.
BeforeAfterWhat DuraFlex Chimney Cleaning & Sweep Costs in Ashburn
| Service | Typical Price in Ashburn |
|---|---|
| Standard DuraFlex liner sweep (single flue, no glaze) | $189 - $249 |
| DuraFlex sweep with Class II creosote removal | $249 - $329 |
| DuraFlex sweep with Class III glaze removal | $329 - $449 |
| Level 2 camera inspection (standalone or added to sweep) | $149 - $199 |
| Tee-body cleanout and camera pass | $75 - $125 |
What moves the price: flue height, creosote class, and whether the tee cleanout is accessible. Ashburn homes with two-story fireplaces or roof pitches over 8/12 cost more because of ladder and roof safety time. But you’ll never pay a surprise fee. We quote in writing before we start, and if you bring us a competitor’s written estimate, we’ll give you a free second opinion on it. Call (240) 220-9412 for an exact quote.
Why Ashburn Homeowners Call Level Two Chimney Ashburn for DuraFlex Work
Most of our Ashburn clients found us because a neighbor got burned by a company that quoted one price over the phone and another after the tech was on the roof. We don’t do that. Every DuraFlex job we do includes a camera scan before and after, a written price before we start, and a photo record you keep. Clause 4 of the Haven Standard requires a photo record on every job, and we’ve done that on all 38,000-plus inspections and cleanings since 2009. We also service HeatShield and Gelco systems, so if your DuraFlex liner has secondary damage or you’re deciding between repair and replacement, we can quote multiple options without calling in a sub. Corrine Halstead runs the operation here, and she’s the person who set the rule: if we can’t show it on camera, we don’t ask you to pay for it.
FAQs
No. DuraFlex’s warranty documentation requires regular maintenance, and a professional sweep with poly brushes or nylon whips is the standard method. What voids warranty coverage is damage from improper tools, like steel whips on a smooth-wall liner. We photograph the liner before and after so you have a record that the cleaning was done correctly.
Annually if you burn wood more than 20 times per season, or every two years for occasional use. Ashburn’s damp fall and winter mean creosote forms faster than in drier climates, so we recommend a spring or early-fall sweep before burning season starts. Call (240) 220-9412 and we’ll schedule a time that works.
Yes, and we’ll show you on camera. We look for pinholes, corrosion at the seams, and warping at the tee body. If the liner’s failing, we’ll show you the footage and hand you a written quote for replacement or resurfacing with HeatShield. You decide from evidence, not a sales pitch.
For connectors, tee caps, and termination components, we use genuine DuraFlex parts because the tolerances matter. For resurfacing or repair options, we may recommend HeatShield or Gelco materials when they’re the better fit for the damage. We’ll tell you which we’re using and why, in writing, before you approve anything.
We inspect it the same way we do every other job: camera down the flue, written findings, written price. We don’t care who installed it. We’ll tell you what’s wrong, what’s needed, and what can wait. The camera doesn’t guess. Neither do we.
If you own a DuraFlex liner in Ashburn and want a chimney sweep that shows you the work, not just tells you it was done, call (240) 220-9412. We answer live, 24/7, and the estimate is free.
Written by Corrine Halstead, Owner, Level Two Chimney Ashburn at Level Two Chimney Ashburn, serving Ashburn and nearby areas.