Famco Chimney Liner & Rebuild Nationwide

Famco Chimney Liner & Rebuild in Ashburn: What to Know First

We provide independent Famco chimney liner replacement and full chimney rebuilds in Ashburn, with most liner jobs completed in a single day once parts arrive. A stainless steel Famco liner replacement typically runs $1,900 to $3,400 here, and a partial rebuild starts around $2,800, with the final number dependent on flue height, access, and what the camera actually shows. The camera doesn’t guess. Neither do we.

Call (240) 220-9412

This page is for homeowners in Ashburn who own a home with a Famco liner or Famco chimney components and need straight answers about repair versus replacement, what fails, what it costs, and what documentation you walk away with. If you’re researching before calling anyone, you’re our kind of customer. We answer the phone 24/7 at (240) 220-9412 with a real person, and we quote in writing before any work starts.

How Famco Products Fail - and How We Fix Them

• Famco flexible stainless steel liners: seam fatigue near the first bend. Famco’s flexible 316L alloy liners are solid products, but in Ashburn we regularly see stress cracks starting where the liner makes its first offset above the smoke chamber. The repeated heating and cooling cycle at that flex point works the seam until it opens. We cut out the compromised section and either sleeve the run or replace the full liner, depending on what the camera footage shows downstream.
• Famco rigid liner sections: failed locking bands at the joints. On Famco rigid liner installations, the locking bands that join sections can loosen after seasons of thermal expansion, especially on exterior chimneys in Ashburn where winter nights drop into the teens and afternoon sun hits the chase. A loose band isn’t a doomsday finding, but it lets flue gas escape into the chimney cavity. We re-seat, and when the band shows fatigue we replace it before it becomes a bigger job.
• Famco chimney caps: screen clogging from Ashburn’s cottonwood and oak debris. The mesh on Famco caps does its job, but the cottonwood fluff and oak tassels we get in Ashburn springs pack into the screen and restrict draft. Owners report smoky fireplaces and assume the liner is failing when it’s actually a clogged cap. We clear it, photograph it, and show you the before and after on the spot.
• Famco chase covers: rust-through at the corners. Famco chase covers on prefab chimney chases are prone to corner rot after ten-plus years in Northern Virginia humidity. You’ll see rust streaks down the siding or water staining inside the chase. Once the corners go, water gets to the liner insulation and the framing. We replace the chase cover and assess the liner for moisture damage while we’re there.
• Famco liner insulation wrap: breakdown from moisture exposure. When a chase cover fails or a crown cracks, the first thing that degrades is the insulation wrap around the liner, and Famco’s wrap is no exception. Wet insulation loses its R-value, which changes draft and accelerates condensation inside the liner. We identify it with the camera and moisture readings, then address the water entry point before replacing the insulation. Fixing the liner without fixing the water entry is just scheduling your next repair.

Our Famco Chimney Liner & Rebuild Process

Here’s how a Famco liner or rebuild job runs from first call to final walkthrough:

1. 1
   Call and written scope. You call (240) 220-9412. We talk through what you’re seeing. If a camera inspection makes sense, we schedule it at a time that works for you, and you get the price for that inspection in writing before we arrive.
2. 2
   Camera down the flue. Our tech runs the camera, and we watch the footage together on site. You see what we see. We measure, photograph, and note liner condition, crown integrity, and creosote class in plain language.
3. 3
   Written price and parts decision. We lay out the repair or replacement recommendation with a hard dollar figure. If a Famco OEM part is the right call for warranty continuity, we use it. If a comparable aftermarket part from DuraFlex, HeatShield, or Gelco does the job at a better price, we tell you and let you decide. You never have to ask which is which, we tell you up front.
4. 4
   The work. Liner replacement or rebuild proceeds with the scope in writing. No add-ons, no “while we’re in there” surprises. We text you when the tech is en route and again when the job is done.
5. 5
   Testing and documentation. We run the draft check, verify the connection, and photograph the completed work. You receive the full photo record, the written scope, and the written warranty, per Clause 4 of the Haven Standard.
6. 6
   365-Day Done Right Promise. If anything about the job isn’t done right, we make it right. That’s the promise stamped on every job we complete in Ashburn.

Before

After

What Famco Chimney Liner & Rebuild Costs in Ashburn

Here’s what Ashburn homeowners can expect to pay for common Famco repair and replacement scenarios, based on work we’ve completed across One Loudoun, Broadlands, and Brambleton:

• Famco liner section repair (localized crack or seam): $450 to $900
• Full Famco flexible liner replacement (single-story flue): $1,900 to $2,600
• Full Famco liner replacement (two-story flue with chase access): $2,600 to $3,400
• Partial chimney rebuild with crown replacement: $2,800 to $4,500
• Full chimney rebuild from the roofline up: $5,500 to $9,000

What moves the number: flue height, whether your chimney is interior or exterior, access (roof pitch, scaffolding, or a chase), the condition of the surrounding masonry, and whether we’re sourcing Famco OEM or equivalent aftermarket materials. You’ll get a written price before anyone starts, and estimates are always free. Call (240) 220-9412 and we’ll schedule the camera run.

Why Ashburn Homeowners Call Level Two Chimney Ashburn for Famco Work

We’ve been running camera-scan inspections and chimney work in Ashburn since before it was the data-center capital of Loudoun County. Corrine Halstead, our owner, built this operation on a simple rule: show the customer what you found, quote the price in writing, and stand behind the work with your name on it. Every Famco liner job we do includes a documented photo record, a written scope, and a written warranty before the tech starts. If a written estimate from another company has you questioning the number, bring it to us. We’ll give you a free second opinion, no strings, no pressure. And if the right fix isn’t a Famco part, we’ll say so, we stock and install DuraFlex, HeatShield, and Gelco components when they’re the better option for your chimney and your budget. Our techs are background-checked, uniformed, and show up with the license number on the truck and a text confirming they’re on the way.

FAQs